Questions? Call us at (800)-720-TREE (8733)
M-F 8-5:30 PM EST
Home > Plant Health Care > 


BUG BARRIER KIT 30'Click to Change Image   BUG BARRIER KIT 30'Click to Change Image


SKU: 011530
This product was added in our store 6/6/2019 5:35:25 PM.
Stock: Out of Stock
Price: $106.50
Wishlist Add to Wish List
Show Cart Show Cart
E-Mail to a Friend E-Mail to a Friend
Keep Shopping Keep Shopping
Product Description

Bug Barrier 30' Kit - General Use

The BugBarrier Tree Band is a simple-to-install and non-poisonous approach to effectively trapping and killing a list of insects capable of defoliating full-grown trees. BugBarrier Tree Band works the entire season to catch canker worms, gypsy moths, ants or similar insects on a hidden, sticky surface that stops them from climbing trees.

The product arrives in two rolls. The first is dense cotton under layer that fills crevices in the bark to detour passage above. The second roll is a sticky and wide band capable of retaining thousands of tree-killing pests during the season. Although most pest movements happen in the spring and fall, check with your local extension service to find out the correct season. Best of all, when your customer sees how effectively this product works, you can expect a call every season!

BugBarrier Tree Band can be installed in 3-5 minutes and removed in about 30 seconds using the step by step instructions listed below. The only tools required are scissors or utility knife and, for deeply furrowed bark, a putty knife.


  • Effective non-chemical barrier to climbing and crawling insects.
  • Easy to install and remove.
  • Effective against bugs yet harmless to the touch.
  • Doesn't stain bark of otherwise affect tree's health.
  • Effective against spring and fall cankerworm, forest tent caterpillar larvae, gypsy moth larvae, ants and most other crawling insects.
  • For Gypsy Moth use Kit: 005279

Please read entire product label before use.



  1. Wrap one layer of the 3" wide white fiber material around the tree circumference at DBH (diameter at breast height, approximately 4.5') so it clings to the bark.
    • Do not put tension on the material.
    • *Wrap a second layer on top of the first.
    • For deeply furrowed bark, use a narrow putty knife to push fiber into all the furrows. [1,2]
  2. Finish this step by cutting the fiber. [3]
  3. For trees up to 24" in diameter, measure off enough green film barrier to go around the fiber barrier, and cut it.
    • For trees over 2' to 4' in diameter, add six more inches of overlap.
    • To assure the most secure installation, be sure you have an overlap of three inches per foot of tree diameter after cinching down the film. [4]
  4. The film must be applied in the same direction as the fiber. Peel about 12 inches of protective backing from the film to expose the adhesive. Align the top edge of the film adhesive with the top edge of the fiber barrier so that the fiber is covered by the film. Wrap the film snugly to the fiber, cinching the film down on the fiber as you go around the tree. Make sure that the film hangs down about 3" below the bottom of the fiber and stands out 1.5" from the tree trunk so the adhesive does not touch the bark. [5,6]
  5. As you snug down the film, there will appear to be some left over. That's important; this overlap creates the secure fit that keeps the fiber in the bark crevices and holds the band to the tree. [7]
  6. Fill any gaps in the bark or trunk irregularities with fiber material by pinching small amounts from the roll and stuffing it into the gaps from the top.

    For Gypsy Moth Kit:
  7. For gypsy moth, use our 5" wide Gypsy Moth Wrap to provide a ramp for the larvae to get down the tree so the band can stop them on their way back up.
  8. Start applying the Gypsy Moth Wrap at the upper edge of the BugBarrier Tree Band, making sure the wrap covers both the film and the fiber. Apply two wraps of the 5" material as you move upward from the band.
  9. The Gypsy Moth Wrap should be snug, but not so tight that it deforms the BugBarrier Tree Band.
  10. Cut the wrap and the end will cling to the barrier on its own.


  • Bug Barrier Kit 10' (Comes with: 10' Film & 10' Fiber)
  • Bug Barrier Kit 30' (Comes with: 30' Film & 30' Fiber)
  • Bug Barrier Gypsy Moth Kit 30' (Comes with: 30' Fiber, and 500'' Top Wrap Film)
  • Bug Barrier Kit 250' (Contains: 250' Fiber & 250' Film only)
    *Oversized item - not available for free shipping
  • Bug Barrier Fiber Only: 250' (Contains only 250' Fiber)
    *Oversized item -
    not available for free shipping
  • Bug Barrier Film Only: 250' (Contains only 250' Film)
    *Oversized item -
    not available for free shipping
  • Bug Barrier Top Wrap Film Only: 500'


All rights reserved. SHELTER